• RZR XP 2-Seat Radius Cage Kit

    $1,340.00
    Introducing The Weld It Yourself RADIUS Cage Kit For Your 2014+ Polaris XP1000 2 Seater! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES
    • 17 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
    • 1.75" OD .095 Wall DOM Tubing For Main Structure
    • 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
    • (2) A Pillar & (4) B Or C Pillar Clamps To Attach To OEM Cage Location
      REQUIRES
    • Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
    UPGRADES
    • Aluminum Roof - .06 Thick Roof W/ Small Visor Bend - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
    NOTES
    • This Cage Sits 19.7" (50.00cm) Tall From Center of Top B Pillar Mounting Bolt To Highest Point On Cage
    • Aluminum Roof Upgrade Is A Single Piece Of .06 Aluminum With A Slight Visor Bend Up Front To Match The Cage Radius
    INSTALLATION VIDEO
    • Installation Video Of RZR Flat Cage Below (Note: The Cage In The Video Is An OLD Style 2 Piece Main Hoop, Current Cage Is One Piece Hoops As Seen In Product Gallery)
    Select options Details

  • RZR XP 4-Seat Radius Cage Kit

    $1,640.00
    Introducing the weld-it-yourself RADIUS cage kit for your 2014+ Polaris XP1000 4 Seater! This cage is built with .120" &  .095" DOM tubing that can be either MIG or TIG welded without the use of a specialized fixture - just install the supplied connectors to the stock cage locations and piece together the cage on the vehicle.   INCLUDES
    • 17 Laser cut tube pieces with laser-etched part numbers on each component
    • 1.75" OD .120 Wall DOM Tubing for main structure (2 piece main hoops)
    • 1.75" OD x .095 Wall For Main Structure Components & 1.50" OD x .095 Wall DOM Tubing For Windshield Cross Bars
    • (2) A Pillar & (4) B or C Pillar clamps to attach to OEM cage location
      REQUIRES
    • Welding - This kit can be welded together once configured on the vehicle
    UPGRADES
    • Aluminum Roof - .06 thick 2 piece roof w/ small visor bend & bead rolled connection - Complete with weld on tabs and 1/4" grade 8 hardware
    NOTES
    • Measuring from the frame mounting bolt on the B Pillar of your RZR to 42.60" will give you the total height of the LSK cage (See photo in product gallery)
    • Aluminum roof upgrade is a single piece of .06 aluminum with a slight visor bend up front to match the cage radius
    Select options Details

  • CanAm Radius 4 Seat Kit

    $1,680.00
    Introducing The Weld It Yourself RADIUS Cage Kit For The Can-am X3 MAX! This Cage Is Built With .120 Wall DOM Main Tubes And .095" DOM Support Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES
    • 24 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
    • 1.75" OD .120 Wall DOM Tubing For Main Hoops
    • 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
    • Mounting Plates & Hardware To Mount In Factory Landing Locations
      REQUIRES
    • Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
    UPGRADES
    • Aluminum Roof - .06 Thick 2 Piece Roof W/ Small Visor Bend And Bead Rolled Joint - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
    NOTES
    • This Cage Sits 15.20" (38.60cm) Tall From B Pillar Mounting Plate To Highest Point On Cage
    • Late Model X3's Come With A Clamp Style Mount At The A-Pillar Landing Point - This Clamp Must Be Cut Off And The Supplied Flat Plate Will Be Installed In Its Place.
    • Must Use A Floor Jack Under Center Of Vehicle During Installation To "Level Out" The Frame Rails - Failure To Do So Will Make Aligning The Cage At The Factory Locations Difficult
    INSTALLATION VIDEO https://youtu.be/kZP8o3TTLag
    Select options Details

  • Yamaha YXZ Cage Kit

    $1,340.00
    Introducing The Weld It Yourself RADIUS Cage Kit For The Yamaha YXZ! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES
    • 17 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
    • 1.75" OD .095 Wall DOM Tubing For Main Structure
    • 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
    • (4) A or C Pillar Clamps & (2) B Pillar Clamps To Attach To OEM Cage Location
    REQUIRES
    • Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
    UPGRADES
    • Aluminum Roof - .06 Thick Roof W/ Small Visor Bend - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
    NOTES
    • This Cage Sits 17.00" (41.27cm) Tall From Center Of B Pillar Through Bolt To Highest Point On Cage
    • Aluminum Roof Upgrade Is A Single Piece Of .06 Aluminum With A Slight Visor Bend Up Front To Match The Cage Radius
    • Harness Bar Measures A 1.5" OD Diameter
    INSTALLATION VIDEO
    Select options Details
Go to Top