• Yamaha YXZ Cage Kit

    $1,340.00
    Introducing The Weld It Yourself RADIUS Cage Kit For The Yamaha YXZ! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES
    • 17 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
    • 1.75" OD .095 Wall DOM Tubing For Main Structure
    • 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
    • (4) A or C Pillar Clamps & (2) B Pillar Clamps To Attach To OEM Cage Location
    REQUIRES
    • Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
    UPGRADES
    • Aluminum Roof - .06 Thick Roof W/ Small Visor Bend - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
    NOTES
    • This Cage Sits 17.00" (41.27cm) Tall From Center Of B Pillar Through Bolt To Highest Point On Cage
    • Aluminum Roof Upgrade Is A Single Piece Of .06 Aluminum With A Slight Visor Bend Up Front To Match The Cage Radius
    • Harness Bar Measures A 1.5" OD Diameter
    INSTALLATION VIDEO
    Select options Details

  • XJ Hybrid Cage Kit

    $1,826.00
      The XJ Cherokee hybrid cage kit is available for four-door models only but can be made to fit a two-door with some minor trimming.  The exterior part of the cage kit includes the roof hoop and a-pillar/windshield bars.  The Interior part of the kit includes the b/c/d pillars and bracing.  16 cage plates are included to sandwich the roof attaching the interior to the exterior cage as well as the interior cage to the sliders and unibody at the rear.  Sliders are necessary (No Longer an option we have time for) you can use any brand as long as there is adequate support for the a-pillar post.  Trimming will be required at this location. IMPORTANT – B PILLAR MUST BE TIED TO UNIBODY STIFFENERS Main tubes are 1.75 x 0.120 wall DOM Smaller tubing is 1.5 and 1.25 for gusseting. Please download and read the instructions below and contact us with any questions. Kits are made in small batches and we have yet to be able to keep up with demand and have them in stock.  Typical lead time is 2 weeks to ship.  All kits are shipped UPS Ground.
    THANKS TO SHIPPING COST INCREASES DURING PEAK SEASONS THERE IS AN ADDITIONAL FEE INCLUDED IN THE PRICE NOW - SORRY!!  WE ARE CONSTANTLY WORKING TO REDUCE COSTS BUT SHIPPING IS GETTING OUT OF HAND
    XJ Hybrid Instructions  
    Add to cart Details

  • Welderd T-Shirt

    $25.00
    "Sure it's safe, I Welderd it myself" FREE Shipping on Swag Items!!
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Welderd Magnetic Koozie

    $10.00
    1 Free Koozie with larger orders - add kit to cart to receive discount
    Add to cart Details

  • Test Item 13

    $0.56
    Test fake product.
    Add to cart Details

  • RZR XP 4-Seat Radius Cage Kit

    $1,640.00
    Introducing the weld-it-yourself RADIUS cage kit for your 2014+ Polaris XP1000 4 Seater! This cage is built with .120" &  .095" DOM tubing that can be either MIG or TIG welded without the use of a specialized fixture - just install the supplied connectors to the stock cage locations and piece together the cage on the vehicle.   INCLUDES
    • 17 Laser cut tube pieces with laser-etched part numbers on each component
    • 1.75" OD .120 Wall DOM Tubing for main structure (2 piece main hoops)
    • 1.75" OD x .095 Wall For Main Structure Components & 1.50" OD x .095 Wall DOM Tubing For Windshield Cross Bars
    • (2) A Pillar & (4) B or C Pillar clamps to attach to OEM cage location
      REQUIRES
    • Welding - This kit can be welded together once configured on the vehicle
    UPGRADES
    • Aluminum Roof - .06 thick 2 piece roof w/ small visor bend & bead rolled connection - Complete with weld on tabs and 1/4" grade 8 hardware
    NOTES
    • Measuring from the frame mounting bolt on the B Pillar of your RZR to 42.60" will give you the total height of the LSK cage (See photo in product gallery)
    • Aluminum roof upgrade is a single piece of .06 aluminum with a slight visor bend up front to match the cage radius
    Select options Details

  • RZR XP 2-Seat Radius Cage Kit

    $1,340.00
    Introducing The Weld It Yourself RADIUS Cage Kit For Your 2014+ Polaris XP1000 2 Seater! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES
    • 17 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
    • 1.75" OD .095 Wall DOM Tubing For Main Structure
    • 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
    • (2) A Pillar & (4) B Or C Pillar Clamps To Attach To OEM Cage Location
      REQUIRES
    • Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
    UPGRADES
    • Aluminum Roof - .06 Thick Roof W/ Small Visor Bend - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
    NOTES
    • This Cage Sits 19.7" (50.00cm) Tall From Center of Top B Pillar Mounting Bolt To Highest Point On Cage
    • Aluminum Roof Upgrade Is A Single Piece Of .06 Aluminum With A Slight Visor Bend Up Front To Match The Cage Radius
    INSTALLATION VIDEO
    • Installation Video Of RZR Flat Cage Below (Note: The Cage In The Video Is An OLD Style 2 Piece Main Hoop, Current Cage Is One Piece Hoops As Seen In Product Gallery)
    Select options Details

  • RZR Elite WD Cage Kit

    $995.00
    Fits all 2-seat 2014-current RZR XP 1000 and Turbo models. Does not Fit RZR S or RZR PRO. The WelderD RZR Elite WD Cage Kit is now available!  The factory cage, like most other machines, lacks both safety and styling.  Our RZR Elite WD Cage Kit will lower the roofline and produce a safer, better-looking machine.  As with all our kits this RZR Elite WD Cage Kit is made with DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator.  Everything necessary to create a strong, safe and good-looking aftermarket cage is provided with the kit – you just supply the welds! The Elite line is available without options.  We’ve preselected the options for you to provide the strength and styling our customers expect.  All Elite kits are standard with 1.75 x 0.120 DOM main tubing.  Double B pillar and some bracing can be omitted if desired but will still be included.  If our Elite line doesn’t fit your needs please contact us to start the custom design process or look at our other options for your RZR. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. RZR Elite WD Cage Kit Directions We provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect-fit aluminum roof. RZR Elite WD Cage Roof File.dxf  
    Add to cart Details

  • Roof Tabs & Hardware

    $4.25
    These are the parts we use in house for mounting panels and roofs. This product includes: 1 - Trick Tab, .085″ Steel, 1/2″ Hole, Formed 1 - Black Body Bolt Clip, has 1/4 – 20 threaded built in nut 1 - Body Washer, Aluminum, Countersunk for a 1/4″ flat head screw, 1″ OD, comes with stainless steel screw Typically we use 10-12 on 2 seat sxs cages. Please don't only order these - cost is higher on this page.  Look for the bundle with your cage kit to get them at the same time.  Thank you!
    Add to cart Details

  • Kawasaki KRX4 Cage Kit

    $1,250.00
    Windshield area is the same as factory and should fit most windshields without modification. The WelderD KRX4 Cage Kit is now available for one of the most capable sxs on the market!  The factory cage, like most other machines, lacks both safety and styling.  Our KRX4 Cage Kit will lower the roof line and produce a safer, better looking machine.  As with all our kits this KRX4 Cage Kit is made with .120 DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator.  Everything necessary to create a strong, safe and good looking aftermarket cage is provided with the kit – you just supply the welds! The KRX4 kit is available without options.  We’ve preselected the options for you to provide the strength and styling our customers expect.  All KRX kits are standard with 1.75 x 0.120 wall DOM main tubing.  Double B pillar and some bracing can be omitted if desired but will still be included.  If this kit doesn’t fit your needs please contact us to start the custom design process. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. Kawasaki KRX4 Cage Kit Directions FREE SHIPPING!
    Add to cart Details

  • Kawasaki KRX Tree Kickers (Version 2)

    $415.00
    We now offer two versions of tree kicker/rock sliders for your Kawasaki Teryx KRX 1000. Both versions are made from 1.75” x 0.120” wall DOM and are designed to clear a 35” tire. We use formed tabs and bolts which offer superior strength over other manufacturers' flat tabs which tend to bend no matter the thickness.   Version 2 This version has more tubing/bracing than our lighter-weight version to provide additional protection and be a functional step. We offer the tree kickers in both kit form ($415) and raw welded ($595). Our kits are prebent, cnc notched with etched part numbers and slot and tabs for ease of locating parts.  All you need to do is follow the instructions and weld them up!   Welded assemblies are only available raw uncoated.  We do this to save costs and prevent shipping damage saving us overhead cost and giving us the ability to pass the savings on to you. Please download/print and review the directions for this kit below PRIOR to placing your order as these will NOT be included with your shipment. Directions: Kawasaki KRX Tree Kicker Directions Add Hardware $15  (8-M10x1.25x40 bolts and washers) FREE SHIPPING!    
    Select options Details

  • Kawasaki KRX Tree Kickers (Version 1)

    $345.00
    We now offer two versions of tree kicker/rock sliders for your Kawasaki Teryx KRX 1000. Both versions are made from 1.75” x 0.120” wall DOM and are designed to clear a 35” tire. We use formed tabs and bolts which offer superior strength over other manufacturers' flat tabs which tend to bend no matter the thickness.   Version 1 This is a simple lightweight version to protect from rocks, stumps and trees without added weight. We offer the tree kickers in both kit form ($345) and raw welded ($495). Our kits are prebent, cnc notched with etched part numbers and slot and tabs for ease of locating parts.  All you need to do is follow the instructions and weld them up!   Welded assemblies are only available raw uncoated.  We do this to save costs and prevent shipping damage saving us overhead cost and giving us the ability to pass the savings on to you. Please download/print and review the directions for this kit below PRIOR to placing your order as these will NOT be included with your shipment. Directions: Kawasaki KRX Tree Kicker Directions Add Hardware $15  (8-M10x1.25x40 bolts and washers) FREE SHIPPING!    
    Select options Details
Go to Top