• CanAm Radius 2 Seat Kit

    $1,380.00
    Introducing The Weld It Yourself RADIUS Cage Kit For The Can-am X3! This Cage Is Built With .095" DOM Support Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES
    • 20 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
    • Made 1.75" & 1.50" .095 Wall DOM Tubing
    • Mounting Plates & Hardware To Mount In Factory Landing Locations
      REQUIRES
    • Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
    UPGRADES
    • Aluminum Roof - .06 Thick Roof W/ Visor Bend - Complete With Weld On Tabs And 1/4" Button Head Hardware
    NOTES
    • Late Model X3's Come With A Clamp Style Mount At The A-Pillar Landing Point - This Clamp Must Be Cut Off And The Supplied Flat Plate Will Be Installed In Its Place.
    • The Shipping Box Is Quite Large For This Particular Model, It Is Recommended To Not Lift The Box On Your Own
    INSTALLATION VIDEO https://youtu.be/kBx7pvkXvYw
    Select options Details

  • CanAm Radius 4 Seat Kit

    $1,680.00
    Introducing The Weld It Yourself RADIUS Cage Kit For The Can-am X3 MAX! This Cage Is Built With .120 Wall DOM Main Tubes And .095" DOM Support Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES
    • 24 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
    • 1.75" OD .120 Wall DOM Tubing For Main Hoops
    • 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
    • Mounting Plates & Hardware To Mount In Factory Landing Locations
      REQUIRES
    • Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
    UPGRADES
    • Aluminum Roof - .06 Thick 2 Piece Roof W/ Small Visor Bend And Bead Rolled Joint - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
    NOTES
    • This Cage Sits 15.20" (38.60cm) Tall From B Pillar Mounting Plate To Highest Point On Cage
    • Late Model X3's Come With A Clamp Style Mount At The A-Pillar Landing Point - This Clamp Must Be Cut Off And The Supplied Flat Plate Will Be Installed In Its Place.
    • Must Use A Floor Jack Under Center Of Vehicle During Installation To "Level Out" The Frame Rails - Failure To Do So Will Make Aligning The Cage At The Factory Locations Difficult
    INSTALLATION VIDEO https://youtu.be/kZP8o3TTLag
    Select options Details

  • Click 6 Harness Tabs

    $10.25

    $3 off with kit in cart

    These tabs are designed to remount the OEM Polaris Click 6 seatbelts/harnesses when building a new rollcage.   They can also be used for regular harnesses and other manufacturers retractable harnesses with slight modifications (if even necessary).

    -Laser cut/CNC bent-1/8" Thick Steel Tabs. Plenty of surface for maximum weld joining.

    -Fits 1-1/2" & 1-3/4" Tube

     -For 1-3/4" we recommend a mild bend on the top overlay tab. 

    -Can easily be modified to fit other sizes and uses.

    -You will need 2 tabs per seat

    -Sold individually (if you need 4 tabs order a quantity of 4)

    Please don't only order these - cost is higher on this page.  Bundle with your cage kit to get them at the same time.  We don't make or intend to stock many of these and they are available cheaper from the manufacturer but we want to offer them as a convenience.  Thank you!
    Add to cart Details

  • Honda Talon 2-Seat Cage Kit

    $950.00
    The WelderD Honda Talon 2-seat Cage Kit is now available!  The factory cage, like most other machines, lacks both safety and styling.  Our Honda Talon Cage Kit will lower the roofline and produce a safer, better-looking machine.  As with all our kits, this Honda Talon Cage Kit is made with DOM tubing, bent notched and ready to install on your machine by a qualified welder/fabricator.  Everything necessary to create a strong, safe and good-looking aftermarket cage is provided with the kit – you just supply the welds! We’ve preselected the options for you to provide the strength and styling our customers expect.  All kits are standard with 1.75 x 0.120 wall DOM main tubing.  If this cage kit doesn’t fit your needs please contact us to start the custom design process. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. Honda Talon Cage Kit Directions We also provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect fit aluminum roof. Honda Talon Cage Roof File.dxf
    Add to cart Details

  • Jeep YJ Cage Kit

    $1,826.00
    The YJ interior cage kit is finally available! Due to the age in these vehicles (rust) we have added a little extra in our cage kit to ensure your safety. Our kit is complete and includes seat mounting tubes and frame tie-ins. All the floor plates, bushings, and seat tabs are included with pre-bent and notched tubing. All you need to supply is the bolts for the cage plates. All tubing shown in the instructions is included – no extra cost for essential bracing! Our kit was made on a factory YJ with a 1-1/2” body lift and boat sides and used standard Corbeau fixed back seats. If you have a larger body lift – remove it! If you have no-body lift some trimming of the frame mounts may be necessary. If you don’t have boat sides that’s fine it will still fit. If you have different seats we recommend you upgrade to a fixed back seat and utilize the harness bar and seat mounting tubes for optimum safety. Other seats can be made to work but might not work with the X bracing behind the seat. We highly recommend that your seats be mounted to your cage properly and not the factory floor that is likely rusting away or highly modified.  Back seats are still useable but a bit more difficult to access due to the bracing. Main tubes are 1.75 x 0.120 wall DOM Smaller tubing is 1.5 and 1.25 for gusseting. We tried to included a bunch of  photos of our installations to help you with your installation but please read the instructions first.

    FREE SHIPPING IN THE U.S.

    THANKS TO SHIPPING COST INCREASES DURING PEAK SEASONS THERE IS AN ADDITIONAL FEE INCLUDED IN THE PRICE NOW – SORRY!!  WE ARE CONSTANTLY WORKING TO REDUCE COSTS BUT SHIPPING IS GETTING OUT OF HAND
    Jeep YJ Directions
    Kits are made to order and typically ship within 2 weeks of order unless in stock (We can't keep them in stock!).  Kits ship regular ground shipping to your door.  Tracking will be sent when your order is sent out.
    Add to cart Details

  • Kawasaki Kaos Cage Kit

    $995.00
    The WelderD KRX Kaos Cage Kit is now available for one of the most capable sxs on the market!  The factory cage, like most other machines, lacks both safety and styling.  Our KRX Kaos Cage Kit will lower the roof line and produce a safer, better looking machine.  As with all our kits, this KRX Kaos Cage Kit is made with .120 DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator.  Everything necessary to create a strong, safe and good looking aftermarket cage is provided with the kit – you just supply the welds! The Kaos is available in 2 options.  We have a 6.5” drop which gives a low streamline look but is too low for some riders so please check measurements before ordering.  Our 4.5” drop is for taller riders and those that want a better windshield fitment.  All WelderD kits are standard with 1.75 x 0.120 wall DOM main tubing.  Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. *Pictures are of the 6.5” Drop Cage.  You can see the specific windshield photos in the Directions provided at the bottom of this page. Both versions will accommodate a windshield but the lower version may need some trimming for a more desirable look.  Pictures show a Factory Kawasaki glass Windshield. Please download/print and review the directions for this kit below PRIOR to placing your order as these will NOT be included with your shipment. Directions: KRX Kaos Cage Kit Directions We also provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect fit aluminum roof. KRX Kaos Cage Roof File.dxf FREE SHIPPING!
     
    Select options Details

  • Kawasaki KRX Elite Cage Kit

    $995.00
    The WelderD KRX Elite Cage Kit is now available for one of the most capable sxs on the market!  The factory cage, like most other machines, lacks both safety and styling.  Our KRX Elite Cage Kit will lower the roofline and produce a safer, better-looking machine.  As with all our kits this KRX Elite Cage Kit is made with DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator.  Everything necessary to create a strong, safe and good-looking aftermarket cage is provided with the kit – you just supply the welds! The Elite line is available without options.  We’ve preselected the options for you to provide the strength and styling our customers expect.  All Elite kits are standard with 1.75 x 0.120 wall DOM main tubing.  Double B pillar and some bracing can be omitted if desired but will still be included.  If our Elite line doesn’t fit your needs please contact us to start the custom design process. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. KRX Elite Cage Kit Directions We provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect fit aluminum roof. KRX Kaos Cage Roof File.dxf    
    Add to cart Details

  • Kawasaki KRX Front Bumper Kit

    $750.00
    NOTE: Bumper Kits are priced differently when bundled with a cage kit.   We designed this bumper to be sleek, compact and still hold your winch securely.  We keep the winch tucked in tight but still easily accessible and have plenty of airflow for the radiator.  Main tubing is 1.75” x 0.120” wall DOM.  The bumper is tied in with a lower mount as well as 2 upper mounts to ensure a secure pull point.   Currently, we only offer the front winch bumper in kit form until we can perfect production and determine shipping options.  Our kits are prebent, cnc notched with etched part numbers and slots and tabs for ease of locating parts.  All you need to do is follow the instructions and weld them up!   Kawasaki KRX Front Bumper Kit Directions
    Add to cart Details

  • Kawasaki KRX Tree Kickers (Version 1)

    $345.00
    We now offer two versions of tree kicker/rock sliders for your Kawasaki Teryx KRX 1000. Both versions are made from 1.75” x 0.120” wall DOM and are designed to clear a 35” tire. We use formed tabs and bolts which offer superior strength over other manufacturers' flat tabs which tend to bend no matter the thickness.   Version 1 This is a simple lightweight version to protect from rocks, stumps and trees without added weight. We offer the tree kickers in both kit form ($345) and raw welded ($495). Our kits are prebent, cnc notched with etched part numbers and slot and tabs for ease of locating parts.  All you need to do is follow the instructions and weld them up!   Welded assemblies are only available raw uncoated.  We do this to save costs and prevent shipping damage saving us overhead cost and giving us the ability to pass the savings on to you. Please download/print and review the directions for this kit below PRIOR to placing your order as these will NOT be included with your shipment. Directions: Kawasaki KRX Tree Kicker Directions Add Hardware $15  (8-M10x1.25x40 bolts and washers) FREE SHIPPING!    
    Select options Details

  • Kawasaki KRX Tree Kickers (Version 2)

    $415.00
    We now offer two versions of tree kicker/rock sliders for your Kawasaki Teryx KRX 1000. Both versions are made from 1.75” x 0.120” wall DOM and are designed to clear a 35” tire. We use formed tabs and bolts which offer superior strength over other manufacturers' flat tabs which tend to bend no matter the thickness.   Version 2 This version has more tubing/bracing than our lighter-weight version to provide additional protection and be a functional step. We offer the tree kickers in both kit form ($415) and raw welded ($595). Our kits are prebent, cnc notched with etched part numbers and slot and tabs for ease of locating parts.  All you need to do is follow the instructions and weld them up!   Welded assemblies are only available raw uncoated.  We do this to save costs and prevent shipping damage saving us overhead cost and giving us the ability to pass the savings on to you. Please download/print and review the directions for this kit below PRIOR to placing your order as these will NOT be included with your shipment. Directions: Kawasaki KRX Tree Kicker Directions Add Hardware $15  (8-M10x1.25x40 bolts and washers) FREE SHIPPING!    
    Select options Details

  • Kawasaki KRX4 Cage Kit

    $1,250.00
    Windshield area is the same as factory and should fit most windshields without modification. The WelderD KRX4 Cage Kit is now available for one of the most capable sxs on the market!  The factory cage, like most other machines, lacks both safety and styling.  Our KRX4 Cage Kit will lower the roof line and produce a safer, better looking machine.  As with all our kits this KRX4 Cage Kit is made with .120 DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator.  Everything necessary to create a strong, safe and good looking aftermarket cage is provided with the kit – you just supply the welds! The KRX4 kit is available without options.  We’ve preselected the options for you to provide the strength and styling our customers expect.  All KRX kits are standard with 1.75 x 0.120 wall DOM main tubing.  Double B pillar and some bracing can be omitted if desired but will still be included.  If this kit doesn’t fit your needs please contact us to start the custom design process. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. Kawasaki KRX4 Cage Kit Directions FREE SHIPPING!
    Add to cart Details

  • Roof Tabs & Hardware

    $4.25
    These are the parts we use in house for mounting panels and roofs. This product includes: 1 - Trick Tab, .085″ Steel, 1/2″ Hole, Formed 1 - Black Body Bolt Clip, has 1/4 – 20 threaded built in nut 1 - Body Washer, Aluminum, Countersunk for a 1/4″ flat head screw, 1″ OD, comes with stainless steel screw Typically we use 10-12 on 2 seat sxs cages. Please don't only order these - cost is higher on this page.  Look for the bundle with your cage kit to get them at the same time.  Thank you!
    Add to cart Details
Go to Top