-
Test fake product. -
Introducing the weld-it-yourself RADIUS cage kit for your 2014+ Polaris XP1000 4 Seater! This cage is built with .120" & .095" DOM tubing that can be either MIG or TIG welded without the use of a specialized fixture - just install the supplied connectors to the stock cage locations and piece together the cage on the vehicle. INCLUDES- 17 Laser cut tube pieces with laser-etched part numbers on each component
- 1.75" OD .120 Wall DOM Tubing for main structure (2 piece main hoops)
- 1.75" OD x .095 Wall For Main Structure Components & 1.50" OD x .095 Wall DOM Tubing For Windshield Cross Bars
- (2) A Pillar & (4) B or C Pillar clamps to attach to OEM cage location
- Welding - This kit can be welded together once configured on the vehicle
- Aluminum Roof - .06 thick 2 piece roof w/ small visor bend & bead rolled connection - Complete with weld on tabs and 1/4" grade 8 hardware
- Measuring from the frame mounting bolt on the B Pillar of your RZR to 42.60" will give you the total height of the LSK cage (See photo in product gallery)
- Aluminum roof upgrade is a single piece of .06 aluminum with a slight visor bend up front to match the cage radius
-
$3 off with kit in cart
These tabs are designed to remount the OEM Polaris Click 6 seatbelts/harnesses when building a new rollcage. They can also be used for regular harnesses and other manufacturers retractable harnesses with slight modifications (if even necessary).
-Laser cut/CNC bent-1/8" Thick Steel Tabs. Plenty of surface for maximum weld joining.
-Fits 1-1/2" & 1-3/4" Tube
-For 1-3/4" we recommend a mild bend on the top overlay tab.
-Can easily be modified to fit other sizes and uses.
Please don't only order these - cost is higher on this page. Bundle with your cage kit to get them at the same time. We don't make or intend to stock many of these and they are available cheaper from the manufacturer but we want to offer them as a convenience. Thank you!-You will need 2 tabs per seat
-Sold individually (if you need 4 tabs order a quantity of 4)
-
NOTE: Bumper Kits are priced differently when bundled with a cage kit. We designed this bumper to be sleek, compact and still hold your winch securely. We keep the winch tucked in tight but still easily accessible and have plenty of airflow for the radiator. Main tubing is 1.75” x 0.120” wall DOM. The bumper is tied in with a lower mount as well as 2 upper mounts to ensure a secure pull point. Currently, we only offer the front winch bumper in kit form until we can perfect production and determine shipping options. Our kits are prebent, cnc notched with etched part numbers and slots and tabs for ease of locating parts. All you need to do is follow the instructions and weld them up! Kawasaki KRX Front Bumper Kit Directions -
Introducing The Weld It Yourself RADIUS Cage Kit For The Can-am X3! This Cage Is Built With .095" DOM Support Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 20 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- Made 1.75" & 1.50" .095 Wall DOM Tubing
- Mounting Plates & Hardware To Mount In Factory Landing Locations
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick Roof W/ Visor Bend - Complete With Weld On Tabs And 1/4" Button Head Hardware
- Late Model X3's Come With A Clamp Style Mount At The A-Pillar Landing Point - This Clamp Must Be Cut Off And The Supplied Flat Plate Will Be Installed In Its Place.
- The Shipping Box Is Quite Large For This Particular Model, It Is Recommended To Not Lift The Box On Your Own
-
Introducing The Weld It Yourself RADIUS Cage Kit For The Yamaha YXZ! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 17 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- 1.75" OD .095 Wall DOM Tubing For Main Structure
- 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
- (4) A or C Pillar Clamps & (2) B Pillar Clamps To Attach To OEM Cage Location
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick Roof W/ Small Visor Bend - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
- This Cage Sits 17.00" (41.27cm) Tall From Center Of B Pillar Through Bolt To Highest Point On Cage
- Aluminum Roof Upgrade Is A Single Piece Of .06 Aluminum With A Slight Visor Bend Up Front To Match The Cage Radius
- Harness Bar Measures A 1.5" OD Diameter
-
Introducing The Weld It Yourself RADIUS Cage Kit For Your 2014+ Polaris XP1000 2 Seater! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 17 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- 1.75" OD .095 Wall DOM Tubing For Main Structure
- 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
- (2) A Pillar & (4) B Or C Pillar Clamps To Attach To OEM Cage Location
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick Roof W/ Small Visor Bend - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
- This Cage Sits 19.7" (50.00cm) Tall From Center of Top B Pillar Mounting Bolt To Highest Point On Cage
- Aluminum Roof Upgrade Is A Single Piece Of .06 Aluminum With A Slight Visor Bend Up Front To Match The Cage Radius
- Installation Video Of RZR Flat Cage Below (Note: The Cage In The Video Is An OLD Style 2 Piece Main Hoop, Current Cage Is One Piece Hoops As Seen In Product Gallery)
-
Introducing The Weld It Yourself RADIUS Cage Kit For The Can-am X3 MAX! This Cage Is Built With .120 Wall DOM Main Tubes And .095" DOM Support Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 24 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- 1.75" OD .120 Wall DOM Tubing For Main Hoops
- 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
- Mounting Plates & Hardware To Mount In Factory Landing Locations
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick 2 Piece Roof W/ Small Visor Bend And Bead Rolled Joint - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
- This Cage Sits 15.20" (38.60cm) Tall From B Pillar Mounting Plate To Highest Point On Cage
- Late Model X3's Come With A Clamp Style Mount At The A-Pillar Landing Point - This Clamp Must Be Cut Off And The Supplied Flat Plate Will Be Installed In Its Place.
- Must Use A Floor Jack Under Center Of Vehicle During Installation To "Level Out" The Frame Rails - Failure To Do So Will Make Aligning The Cage At The Factory Locations Difficult
