-
Description
We are a dealer for LSK products and this is one of their kits – this partnership allows us, a small business to provide more products to you! Introducing The Weld It Yourself Cage Kit For The RZR Pro R 2 Seater! This Cage Is Built With .120 Wall DOM Main Tubes, .120 Wall DOM B-Pillar Tube, and .095" DOM Support Tubing That Can Be Either MIG or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 3D Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- 75" OD .120 Wall DOM Tubing For The Main Bars and B-Pillar Tubes
- 75" OD .095 Wall DOM Tubing For Remainder 1.75” Tubes
- 25" OD .095 Wall DOM Tubing For Windshield Cross Bars
- Cage Bungs & Hardware To Mount In Factory Cage Mounting Locations
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick 1 Piece Roof W/ Small Visor - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
- Must Use A Floor Jack Under Center Of Vehicle During Installation To "level Out" The Frame Rails - Failure To Do So Will Make Aligning The Cage At The Factory Locations Difficult
-
Description
We are a dealer for LSK products and this is one of their kits – this partnership allows us, a small business to provide more products to you! Introducing The Weld It Yourself Cage Kit For The RZR Pro R 4 Seater! This Cage Is Built With .120 Wall DOM Main Tubes, .120 Wall DOM B-Pillar and C-Pillar Tube, and .095" DOM Support Tubing That Can Be Either MIG or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 3D Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- 75" OD .120 Wall DOM Tubing For The Main Bars and B-Pillar Tubes
- 75" OD .095 Wall DOM Tubing For Remainder 1.75” Tubes
- 25" OD .095 Wall DOM Tubing For Windshield Cross Bars
- Cage Bungs & Hardware To Mount In Factory Cage Mounting Locations
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick 2 Piece Roof W/ Small Visor - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
- Must Use A Floor Jack Under Center Of Vehicle During Installation To "level Out" The Frame Rails - Failure To Do So Will Make Aligning The Cage At The Factory Locations Difficult
-
Introducing The Weld It Yourself RADIUS Cage Kit For The Can-am X3 MAX! This Cage Is Built With .120 Wall DOM Main Tubes And .095" DOM Support Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 24 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- 1.75" OD .120 Wall DOM Tubing For Main Hoops
- 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
- Mounting Plates & Hardware To Mount In Factory Landing Locations
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick 2 Piece Roof W/ Small Visor Bend And Bead Rolled Joint - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
- This Cage Sits 15.20" (38.60cm) Tall From B Pillar Mounting Plate To Highest Point On Cage
- Late Model X3's Come With A Clamp Style Mount At The A-Pillar Landing Point - This Clamp Must Be Cut Off And The Supplied Flat Plate Will Be Installed In Its Place.
- Must Use A Floor Jack Under Center Of Vehicle During Installation To "Level Out" The Frame Rails - Failure To Do So Will Make Aligning The Cage At The Factory Locations Difficult
-
Huge discount with cage kit purchase - just add a kit to cart first
1.75 " DOM 0.120 wall tubing just like our kits
2 - 90 degree tubes are slot and tabbed for location just like our kits 4- 45 degree tubes intersect and overlap these joints This will help setting up your welder and provide joints similar to our cage kits the 45 degree joints can be trimmed to clear the previous 90 welds for full joint weld as well as provide a tight angle that does occur at some locations. Weld it out and display your skills Please don't only order these - cost is significantly higher on this page. Bundle with your cage kit to get them at the same time. We don't intend to stock many of these and they aren't a product we want to sell much but want to offer them to cage kit customers ONLY. Thank you! -
We stock these tabs and use them for various mounts (seat belts mostly) The link above is where we get them from and you are welcome to get them there cheaper but will pay shipping as well SOLD INDIVIDUALLY Please don't only order these - we will cancel the order and a restocking fee may apply. Bundle with your cage kit to get them at the same time. We don't want to sell and ship tabs but want to offer them to cage kit customers ONLY as a convenience. Thank you! -
HD Trick Tabs - Whip Tabs with 1/2" Hole from UTV Distribution
We stock these tabs and use them for various mounts (sliders, belts, etc ) The link above is where we get them from and you are welcome to get them there cheaper but will pay shipping as well Product Features: -Stamped 3/16" steel -1-1/2" wide -1-7/16" Tall -1-7/16" Length -1/2" Hole -Fits 1- 3/4" and 1/1/2" Tube nicely Can easily be modified to fit other sizes. SOLD INDIVIDUALLY Please don't only order these - we will cancel the order and a restocking fee may apply. Bundle with your cage kit to get them at the same time. We don't want to sell and ship tabs but want to offer them to cage kit customers ONLY as a convenience. Thank you! -
Description
We are a dealer for LSK products and this is one of their kits - this partnership allows us, a small business to provide more products to you!Introducing The Weld It Yourself RADIUS Cage Kit For Your Kawasaki KRX 1000! This Cage Is Built With .095″ DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture – Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle.
INCLUDES
18 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component 1.75″ OD .095 Wall DOM Tubing For The Main Bars and B-Pillar Tubes 1.75″ OD .095 Wall DOM Tubing For Remainder 1.75” Tubes 1.25″ OD .095 Wall DOM Tubing For Windshield Cross Bars (2) A Pillar, (2) B Pillar & (2) C Pillar Bungs To Attach To OEM Cage Location
REQUIRESWelding – This Kit Can Be Welded Together Once Configured On The Vehicle
UPGRADES
Aluminum Roof – .06 Thick Roof W/ Small Visor Bend – Complete With Weld On Tabs And 1/4″ Grade 8 Hardware Windshield Kit – Coming Soon!
NOTES
This Cage Sits In Similar Fashion To OEM Cage, See Render With LSk Cage (Grey) Compared To OEM Cage (Blue) Aluminum Roof Upgrade Is A Single Piece Of .06 Aluminum With A Slight Visor Bend Up Front To Match The Cage Radius Must Use A Floor Jack Under Center Of Vehicle During Installation To “Level Out” The Frame Rails – Failure To Do So Will Make Aligning The Cage At The Factory Locations Difficult
-
Description
We are a dealer for LSK products and this is one of their kits – this partnership allows us, a small business to provide more products to you! Introducing The Weld It Yourself Cage Kit For The RZR PRO XP 4 Seater! This Cage Is Built With .120 Wall DOM Main Tubes And .095" DOM Support Tubing That Can Be Either MIG or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 30 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- 75" OD .095 Wall DOM Tubing For Main Structure
- 50" OD .095 Wall DOM Tubing For Windshield Cross Bars
- Cage Bungs & Hardware To Mount In Factory Cage Mounting Locations
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick 2 Piece Roof W/ Small Visor Bend And Bead Rolled Joint - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
- This Cage Sits 17.80" (45.21cm) Tall From Center Of B Pillar Through Bolt To Highest Point On Cage
- Must Use A Floor Jack Under Center Of Vehicle During Installation To "level Out" The Frame Rails - Failure To Do So Will Make Aligning The Cage At The Factory Locations Difficult
- Coming Soon!
-
We are a dealer for LSK products and this is one of their kits – this partnership allows us, a small business to provide more products to you! Introducing The Weld It Yourself RADIUS Cage Kit For Your 2014+ Polaris XP1000 2 Seater! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 17 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- 1.75" OD .095 Wall DOM Tubing For Main Structure
- 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
- (2) A Pillar & (4) B Or C Pillar Clamps To Attach To OEM Cage Location
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick Roof W/ Small Visor Bend - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
- This Cage Sits 19.7" (50.00cm) Tall From Center of Top B Pillar Mounting Bolt To Highest Point On Cage
- Aluminum Roof Upgrade Is A Single Piece Of .06 Aluminum With A Slight Visor Bend Up Front To Match The Cage Radius
- Installation Video Of RZR Flat Cage Below (Note: The Cage In The Video Is An OLD Style 2 Piece Main Hoop, Current Cage Is One Piece Hoops As Seen In Product Gallery)
-
Introducing The Weld It Yourself RADIUS Cage Kit For The Yamaha YXZ! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 17 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- 1.75" OD .095 Wall DOM Tubing For Main Structure
- 1.50" OD .095 Wall DOM Tubing For Windshield Cross Bars
- (4) A or C Pillar Clamps & (2) B Pillar Clamps To Attach To OEM Cage Location
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick Roof W/ Small Visor Bend - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
- This Cage Sits 17.00" (41.27cm) Tall From Center Of B Pillar Through Bolt To Highest Point On Cage
- Aluminum Roof Upgrade Is A Single Piece Of .06 Aluminum With A Slight Visor Bend Up Front To Match The Cage Radius
- Harness Bar Measures A 1.5" OD Diameter
-
Introducing The Weld It Yourself RADIUS Cage Kit For The Can-am X3! This Cage Is Built With .095" DOM Support Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle. INCLUDES- 20 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
- Made 1.75" & 1.50" .095 Wall DOM Tubing
- Mounting Plates & Hardware To Mount In Factory Landing Locations
- Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
- Aluminum Roof - .06 Thick Roof W/ Visor Bend - Complete With Weld On Tabs And 1/4" Button Head Hardware
- Late Model X3's Come With A Clamp Style Mount At The A-Pillar Landing Point - This Clamp Must Be Cut Off And The Supplied Flat Plate Will Be Installed In Its Place.
- The Shipping Box Is Quite Large For This Particular Model, It Is Recommended To Not Lift The Box On Your Own
